Electrohome EANOS502 Bedienerhandbuch PDF herunterladen (Seite 14)

- 14 -

OPERATION

Replacing the stylus:

IMPORTANT: Avoid touching the stylus itself.

1. Lift the tone arm o the tone arm rest.

2. At the front end of the tone arm, place the tip of your ngernail between the red stylus holder and

the black cartridge housing as shown, press down on the red stylus holder until it separates from the

cartridge housing.

3. Completely remove the red stylus holder with worn stylus and discard it.

4. Place the new red stylus holder with stylus under the cartridge housing. First, press upward on the back

side of the stylus holder, and then press up on the front edge of the stylus holder until it snaps into place

on the cartridge housing.

IMPORTANT!

To protect the turntable from damage during transportation, a silver transit screw is located at

the upper right of the turntable platform.

1. Before playing, please use a screwdriver to turn the transit screw in

clockwise direction (screw going down) completely to unlock

the turntable.

2. To lock the turntable again for transportation, please turn screw in

counter-clockwise direction.

CARE AND MAINTENANCE

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Keine Kommentare

Electrohome EANOS502 Bedienerhandbuch Seite 14